lsmfse
Joined: 12 Aug 2006
Posts: 1
Location: California
|
| Posted: Sat Aug 12, 2006 4:23 pm Post subject: A Bus problem |
|
|
I installed an A-BUS 4 room I hooked up zone 1 first(Rear Patio) and the system worked great. I then hooked up Zone 2(front courtyard) and the system worked great. I then hooked up zones 3 & 4 and now nothing works. I reviewed all wiring and found no problems. I've unplugged zones 3&4 and still no luck. I've unplugged the bus unit, still no luck. Does anyone know if I can test the actual hub to see if it is producing the proper signal? I did notice that when I did turn the system on, with the volume full up(zone 1) I somtimes hear a "pop".
Thanks |
|
