| View previous topic :: View next topic |
| Author |
Message |
bstegall
Joined: 25 Mar 2007
Posts: 2
|
| Posted: Sun Mar 25, 2007 9:05 am Post subject: light wont go on with remote |
|
|
| have pool/spa /fountain that is operated with an 8 button remote. the remote works for everything but the pool light (a SAM light). It has operated with remote in past. the lights (pool and spa) each use own xps3 switch...i replaced the pool light xps3 switch...still the light does not go on with remote, it does work if use the rocker switch...i switched the code for pool and spa light at the switches and the pool light then worked but spa light did not...thanks |
|
| Back to top |
|
Ralph
Joined: 16 Dec 2005
Posts: 165
Location: Smithtown, NY
|
| Posted: Mon Mar 26, 2007 12:59 pm Post subject: |
|
|
Please let me know what devices are programmed to the remote and with what codes.
For example
Spa A1
Pool A2
etc. |
|
| Back to top |
|
bstegall
Joined: 25 Mar 2007
Posts: 2
|
| Posted: Mon Mar 26, 2007 4:28 pm Post subject: |
|
|
spalight K2
spa jets K3
pool light K4
spa jet2 K5
water fall 1 K6
waterfall2 K7
waterfall light K8
i believe that is the order for the equip...i do not remember what k1 is...for sure spa and pool lights are correct...also the lights, pool and spa are on a single 15 amp circuit with what appears to be a noise filter...does this info help |
|
| Back to top |
|
Ryan
Joined: 20 Feb 2006
Posts: 48
Location: Smithtown, NY
|
| Posted: Mon May 21, 2007 7:42 pm Post subject: |
|
|
Sounds like a signal issue.
I would try changing the house code. Also try moving your transciever (remote receiver) to different outlets around your house, or ideally the same circuit your lights are wired to.
If you can get the pair to work there, i would say your noise filter is having problems. Try shutting off as many motors and other noise sources as possible.
We carry a line of x10 test equipment that helps troubleshoot situations like this. |
|
| Back to top |
|
| |
