| View previous topic :: View next topic |
| Author |
Message |
Vince
Joined: 08 Aug 2007
Posts: 2
|
| Posted: Wed Aug 08, 2007 10:53 am Post subject: Routing slave device programming |
|
|
I bought some CA3000 and CA5100 wall switches with the intent to control HA03 (lamp module) and HA04 (outdoor module) with those routing slave devices. I also picked up a HA09 controller to setup the network
Pb is the documentation is very scarce. I've got the network setup and can control all modules from the HA09 just fine, the problem comes when I want to setup the routing slave devices.
How do I do this ? can I do it with the HA09 ? The Intermatic user manual describes method with CA5500 only.
Note that I also posted in the intermatic forum http://www.intouchcontrolsforum.com/forums/index.php
Thanks
Vincent |
|
| Back to top |
|
Vince
Joined: 08 Aug 2007
Posts: 2
|
| Posted: Fri Aug 10, 2007 5:59 pm Post subject: |
|
|
So, intermatic replied that in their line of product, only the CA5500BR would permit to program slave routing device.
Do you know if any remote from other manufacturer can work with CA3000
If not you should put a warning on the CA3000 product description that it's useless without CA5500BR
Vince |
|
| Back to top |
|
| |
