SmartHomeUSA.com Home Automation Forum Index SmartHomeUSA.com Home Automation
Home Automation Help and Advice for the Do-It-Yourself'er
 

need to add switch
Click here to go to the original topic

 
       SmartHomeUSA.com Home Automation Forum Index -> X10 Pro
View previous topic :: View next topic  
Author Message
Grover



Joined: 10 Jul 2007
Posts: 1
Posted: Tue Jul 10, 2007 6:29 am    Post subject: need to add switch  
I have a box with feed in, feed out, and load (100W) out

I need to add a switch downstream on the feed out line to control the load (same room - opposite side)

Don't need dimming or remote capability, and toggle (not decora) is desirable. No other x-10 on site.

Can't seem to find the right combination searching the x-10 offerings.

Appreciate help or comments
Back to top  
Ian



Joined: 16 Dec 2005
Posts: 72
Location: Smithtown, NY
Posted: Fri Sep 14, 2007 11:44 am    Post subject: need to add switch  
Hello,

Are you talking about a three way switch? If so you you will need a neutral connection in the first box along with the hot, load and traveler.

The problem is that there is more then one way to wire this type of switch. Here is a few examples:


If you are just looking to remotely control the switch and it is not a three way switch then you can use the XPS3 and the XPT-1 Kit


http://www.smarthomeusa.com/Shop/Lighting/X10-Receivers/X10Pro-Receiver-Switches/Item/XPS3-WI/
http://www.smarthomeusa.com/Shop/Lighting/X10-Receivers/X10Pro-Receiver-Switches/Item/XPSS-WI/ 3-way switch
http://www.smarthomeusa.com/Shop/Lighting/X10-Transmitters/X10Pro-Keypad-Transmitters/Item/XPT1WK/


Please let me know if this helps.
Back to top  
 
       SmartHomeUSA.com Home Automation Forum Index -> X10 Pro
Page 1 of 1


phpBB Search Engine Indexer © phpRebel
Powered by phpBB 2.0.22 © 2001, 2002 phpBB Group