scottp
Joined: 17 Dec 2007
Posts: 1
|
| Posted: Mon Dec 17, 2007 6:52 pm Post subject: Using two Floodlight Motion Detector PHS01 |
|
|
I would like to set up two different PHS01 Floods and have them both turn on when either of them detects motion. Is this possible?
If I'm reading the docs correctly, the light can signal Unit Code+1 to +4 when motion is detected. So one controller would be able to control the other but not the other way around.
Is there a different outdoor X10 sensor (without the flood) that will control two units?
If so, I could use one PHS01 and one other sensor plus a standard X10 lighting switch. |
|
