| View previous topic :: View next topic |
| Author |
Message |
azcamper
Joined: 18 Feb 2008
Posts: 2
|
| Posted: Mon Feb 18, 2008 5:28 pm Post subject: X10 In-Line wired switches |
|
|
| I have a ceiling fan/light fixture that is wired to one switch (one hot and neutral line), so the fan and light can not be controlled independently. The fan/light documentation states not to use a solid state fan speed control, as it will damage the fan electronics. The light is halogen, so it may have a power supply?? My question: Are there X10 compatible appliance switches that I could wire two of at the fan box (in ceiling) to independently switch the fan and light on and off? Light dimmer and fan speed control is not needed. |
|
| Back to top |
|
Ian
Joined: 16 Dec 2005
Posts: 61
Location: Smithtown, NY
|
| Posted: Tue Feb 19, 2008 11:53 am Post subject: |
|
|
If you can get two XPFM modules in the box that will control both.
http://www.smarthomeusa.com/Shop/Lighting/X10-Receivers/X10Pro-Receptacle-Fixture/Item/XPFM/
This item does require 3 wires, hot, load and neutral. That should not be a problem as it will be the switch box. Here is a wiring image for a example:
Please let me know if you have any questions. |
|
| Back to top |
|
azcamper
Joined: 18 Feb 2008
Posts: 2
|
| Posted: Sun Feb 24, 2008 2:38 pm Post subject: |
|
|
| Thanks, that looks like exactly what I need. I'll give it a try. |
|
| Back to top |
|
| |
