| View previous topic :: View next topic |
| Author |
Message |
rsloan
Joined: 06 Oct 2008
Posts: 1
|
| Posted: Mon Oct 06, 2008 12:50 am Post subject: |
|
|
I too can not get 2.6.18 working I need 2.5.14! Dang!
Richard. |
|
| Back to top |
|
JarodMacintosh
Joined: 04 Jan 2008
Posts: 5
|
| Posted: Sat Nov 01, 2008 10:25 am Post subject: |
|
|
Here's the old version and all updates.
http://www.door-web.com/mhs.php
With the exception of the latest update from xanboo.
https://homesight.xanboo.com/swupdate2008/
Hope this helps you out. :) |
|
| Back to top |
|
Ian
Joined: 16 Dec 2005
Posts: 80
Location: Smithtown, NY
|
| Posted: Mon Nov 03, 2008 1:24 pm Post subject: |
|
|
| Thanks for posting those helpful links. |
|
| Back to top |
|
Mksman
Joined: 05 Nov 2008
Posts: 1
|
| Posted: Wed Nov 05, 2008 10:32 pm Post subject: Nothing Works! |
|
|
Equipment: Motorola HMGW1070
Software: 2.5.12 & 2.5.14
PC: Dell D620
I have tried every suggestion in this topic and I can still not get the HMGW1070 to be recognized during the software installation. I purchased this almost two years ago, and in the process of moving the base station from one PC to another, the new installation would not work. I believe that one of the key issues is that on the original PC I performed a software upgrade that also appeared to have updated the firmware on the actual base station hardware. I don't recall the version of the upgrade, but the original software came from a CD entitled "HMEZ1000" created 8/10/2004 and the upgrade came via the Software Update Check on-line. After that upgrade, the Base Station still worked with the original computer, but when I tried a fresh install on 3 different virgin computers with the original CD, it did not take. It has not worked with any of the builds I've obtained through this forum or from Xanboo. Xanboo even sent an OEM CD with the latest software.
QUESTION: Is there a way to reset the firmware to factory original? Could there be another solution? |
|
| Back to top |
|
Ryan
Joined: 20 Feb 2006
Posts: 51
Location: Smithtown, NY
|
| Posted: Fri Nov 14, 2008 11:34 am Post subject: |
|
|
I'm not sure what product the HMGW1070 is .. a google search leads me to believe it is a very old part.
I'm surprised you got the HMEZ1000 software to work with your HMGW at all!
Your best bet would be to contact Motorola/Xanboo directly and ask if they have any compatible software for your obsolete system (I am PMing you Xanboo/Motorola's contact information)
For the record, the latest and greatest system is the X1000 (XG1000). The HMEZ2000 is second, which is also about to be obsoleted. |
|
| Back to top |
|
big_mike
Joined: 06 Jan 2009
Posts: 1
|
| Posted: Tue Jan 06, 2009 9:05 pm Post subject: |
|
|
Mksman was correct.
I have been playing around with the HMGW1070 for a couple of days.
It looks like there was a firmware update for the HMGW1070 at about revision 2.5.14.
This changed the USB HardwareId for the device.
When you try to reinstall the device on a different computer it is impossible if you flashed the firmware on 2.5.14.
You need to start at 2.5.12 where the install does not recognize the device because the USB HardwareId is different from the origional.
You cannot start at 2.5.14 because it needs a previous clean install to work from.
I tried copying the drivers from 2.5.14 during a 2.5.12 install. It does install the drivers correctly, but there is a check on the driver version that stops the software from installing.
It seems that whoever wrote the software did not think that someone would have to re-install the software on a different computer.
big_mike |
|
| Back to top |
|
| |
