mebailey
Joined: 20 Nov 2008
Posts: 4
|
| Posted: Fri Nov 21, 2008 10:55 pm Post subject: Help troubleshooting glass break detector issue |
|
|
I just replaced one of my glass break detectors. The new detector is the same model
as the old....a CADDX 2200. It appears to be wired correctly. I have a green
light and when pressing the SW2 (internal test switch), it goes through the
alternating flashing patterns just fine. However, I am not able to arm my
security system without bypassing the zone that contains the detector. I have
also double checked the internal spring that is designed for detecting tampering.
Do you have troubleshooting tips that I can follow next?
Thanks. |
|
